ISO 8734
ISO 8734
Cavilha cilíndrica, forma A
Material: 100Cr6
Tolerância: m6
Temperado e retificado
Dureza: 550 HV30 - 650 HV30
d | m6 | 1 | 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | m6 | d |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
c | ≈ | 0,2 | 0,3 | 0,35 | 0,4 | 0,5 | 0,63 | 0,8 | 1,2 | 1,6 | 2 | 2,5 | 3 | 3,5 | ≈ | c |
tol. | ±0,1 | ±0,2 | tol. | |||||||||||||
l | 03 | 04 | 05 | 06 | 08 | 10 | 12 | 14 | 18 | 22 | 26 | 40 | 50 | l | ||
04 | 05 | 06 | 08 | 10 | 12 | 14 | 16 | 20 | 24 | 28 | 45 | 55 | ||||
05 | 06 | 08 | 10 | 12 | 14 | 16 | 18 | 22 | 26 | 30 | 50 | 60 | ||||
06 | 08 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 28 | 32 | 55 | 65 | ||||
08 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | 35 | 60 | 70 | ||||
10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 28 | 32 | 40 | 65 | 75 | ||||
14 | 16 | 18 | 20 | 22 | 24 | 26 | 30 | 35 | 45 | 70 | 80 | |||||
16 | 18 | 20 | 22 | 24 | 26 | 28 | 32 | 40 | 50 | 75 | 85 | |||||
20 | 22 | 24 | 26 | 28 | 30 | 35 | 45 | 55 | 80 | 90 | ||||||
24 | 26 | 28 | 30 | 32 | 40 | 50 | 60 | 85 | 95 | |||||||
28 | 30 | 32 | 35 | 45 | 55 | 65 | 90 | 100 | ||||||||
30 | 32 | 35 | 40 | 50 | 60 | 70 | 95 | |||||||||
35 | 40 | 45 | 55 | 65 | 75 | 100 | ||||||||||
40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
50 | 55 | 65 | 75 | 85 | ||||||||||||
60 | 70 | 80 | 90 | |||||||||||||
75 | 85 | 95 | ||||||||||||||
80 | 90 | 100 | ||||||||||||||
95 | ||||||||||||||||
100 |
Tolerância do comprimento total (l)
l | min. | max. | l | min. | max. | l | min. | max. | l | min. | max. | l | min. | max. | l | min. | max. | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2,75 | 3,25 | 10 | 9,75 | 10,25 | 20 | 19,5 | 20,5 | 30 | 29,5 | 30,5 | 50 | 49,5 | 50,5 | 75 | 74,25 | 75,75 | |||||
4 | 3,75 | 4,25 | 12 | 11,5 | 12,5 | 22 | 21,5 | 22,5 | 32 | 31,5 | 32,5 | 55 | 54,25 | 55,75 | 80 | 79,25 | 80,75 | |||||
5 | 4,75 | 5,25 | 14 | 13,5 | 14,5 | 24 | 23,5 | 24,5 | 35 | 34,5 | 35,5 | 60 | 59,25 | 60,75 | 85 | 84,25 | 85,75 | |||||
6 | 5,75 | 6,25 | 16 | 15,5 | 16,5 | 26 | 25,5 | 26,5 | 40 | 39,5 | 40,5 | 65 | 65,25 | 65,75 | 90 | 89,25 | 90,75 | |||||
8 | 7,75 | 8,25 | 18 | 17,5 | 18,5 | 28 | 27,5 | 28,5 | 45 | 44,5 | 45,5 | 70 | 69,25 | 70,75 | 95 | 94,25 | 95,75 | |||||
100 | 99,25 | 100,75 |
Ref: ? | ||||||
---|---|---|---|---|---|---|
Exemplo: | Ref. = | D340A | - | XX | - | XXX |
↑ | ↑ | |||||
d | l | |||||
ISO 8724 A | ||||||
10x40 | ||||||
Ref. = | D340A | - | 10 | - | 40 |
Artigo disponível sob consulta, sujeito a quantidades mínimas.
r* Pode ser fornecido com raio e abaulado interior.
Descargar Ficha Técnica del Producto (0.19 MB)
Descargar Catálogo Familia (0.88 MB)
Descargar Catálogo de Productos (42.10 MB)
Descargar Imagen del Producto (3.31 MB)
Descargar Imagen 2D del Producto (0.31 MB)